Thursday, April 25, 2019

Development boards and Tools - OLIMEX

Designs, prototypes and manufactures printed circuit boards, sub-assemblies and complete electonic products.

Development boards and Tools - OLIMEX

64MB SDRAM, 512MB NAND Flash. Ethernet 100Mbit controller, USB host, USB device, RS232 and 40 pin extension port with all unused SAM9261 ports available for add-on boards. Runs Linux, WindowsCE and other RTOS natively. RTC - 3V Li battery.

SAM9-L9261 Development Platform with ARM9

SAM9-L9261 Development Platform with ARM9

SAM9-L9261 is development platform with ARM9 microcontroller, TFT LCD 3.5" 320x240 pixels with TOUCHSCREEN.
  • MCU: AT91SAM9261 16/32 bit ARM9 180MHz operation
  • On board voltage regulator 3.3V with up to 800mA current
OLIMEX Ltd.
89 Slavjanska St., P.O.Box 237, Plovdiv 4000 BULGARIA

Wednesday, April 17, 2019

Ethernut Open Source Hardware Family

Four Ethernut reference designs are available, based on 8-bit AVR as well as 32-bit ARM7 and ARM9. All schematics and the CAD data are published as Open Source Hardware and may be freely used for private or commercial purposes.

Ethernut Open Source Hardware Family

Ethernut 5.0 Board - The high end generation of the Ethernut board family has been designed for embedded Linux applications. Ethernut 5.0 boards are shipped with samboot boot loader programmed in internal Flash memory, U-Boot boot loader, Linux kernel and a sample Nut/OS application programmed in serial Flash memory and a Linux root file system programmed in NAND Flash memory.

Ethernut Open Source Hardware Family

Nut/OS is a modular, open source, real time operating system for embedded platforms. It is easily configurable and optimized to run on 8 and 32 bit microcontrollers.

Nut/OS Modular Multithreading RTOS

Nut/OS is a modular operating system. Instead of providing a fixed kernel block, all code is packed in libraries. Only those parts are linked to the final binary image, which are directly or indirectly referenced by the application.

Wednesday, April 03, 2019

Blue Point Engineering - Animatronics Robotics

Hardware, Electronics, Supplies, Custom Engineering and Technical Assistance for the Animatronic, Robotic, Electronic Arts, Haunted Attractions, Hobbyist and Professional.

Blue Point Engineering - Animatronics Robotics

"..Product line of low cost, high quality, hardware, electronics, and supplies used in animatronics, robotics, haunted Industry and technology education for both the hobbyist and professional designers, imagineers and dreamers creating their own forms of animatronic and robotic life."

The DMX Motor controller  - Blue Point Engineering

The DMX- (Servo) Motor controller allows DC motors to be controlled over a standard DMX system. The board may be configure to drive the DC motor simply as a variable speed, reversible motor or with the addition of a position feed back potentiometer, to create a powerful servo motor controller for accurate positioning purposes.

Blue Point Engineering LLC - BPE Solutions
Longmont, . Colorado .USA

delabs Technologies