Friday, July 27, 2012

Qseven - Computer-On-Module Standard

The Qseven concept is an off-the-shelf, multi vendor, Computer-On-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70mm x 70mm and have specified pinouts based on the high speed MXM system connector that has a standardized pinout regardless of the vendor.

Qseven - Computer-On-Module Standard

These functions include, but are not limited to, graphics, sound, mass storage, network and multiple USB ports. A single ruggedized MXM connector provides the carrier board interface to carry all the I/O signals to and from the Qseven module. This MXM connector is a well known and proven high speed signal interface connector that is commonly used for high speed PCI Express graphics cards in notebooks.

Qseven - Computer-On-Module Standard

Qseven offers the newest I/O technologies on this minimum size form factor. Some are .. PCIexpress, USB 2. Serial ATA, Secure Digital I/O interface. Gigabit Ethernet
    QBliss Qseven

    Since the Qseven form factor was introduced; many manufacturers of boards and software have adopted it. The combination of Qseven and RISC gains more and more importance. The reason is the compatibility of the offered boards, as well as the small form factor (70x70mm) with an inexpensive plug connector

    Thursday, July 19, 2012

    microEngineering Labs - Melabs

    Melabs from Colorado Springs designs and markets embedded systems for Training and Prototype design. The include complete systems for PIC microcontroller development, Device programmers and Programming Adapters that support over 500 Microchip microcontrollers.

    microEngineering Labs - Melabs

    LAB-X Experimenter Boards are set up to work seamlessly with our compilers and programmers.
    "The LAB-X1 contains the circuitry required by the PICmicro to operate: 5-volt power supply, oscillator, reset circuit, as well as additional application circuits. The crystal controlled oscillator includes jumpers to set speeds of 4MHz, 8MHz, 10MHz, 12MHz, 13.32MHz, 16MHz and 20MHz.

    LAB-X1 Experimenter Board - Melabs

    Application circuits include a switch matrix, potentiometers, LEDs, LCD module, serial EEPROMS, real time clock, temperature sensors, servo connectors, RS232 interface, RS485 interface, IR interface and speaker. A prototyping area is also included in case we missed your favorite circuit."

    LAB-X1 Experimenter Board -Assembled from Melabs
    microEngineering Labs, Inc.
    2845 Ore Mill Road, STE 4 Colorado Springs CO 80904
    Microcontroller - 8051, 8052, OpCodes, Analog Interface.

    Embedded Systems

    Embedded Systems
    Microcontroller. PIC Micro, AVR, ARM, ASIC, SoC, DSP, FPGA. Microelectronics.