Monday, November 14, 2011
Contec Austria - Engineering and Manufacturing Service
A turnkey manufacturer or developer and producer of special components.
Contec - Product Development and Consulting
Scope - Microcontroller technology, digital signal processing, rapid digital technology, FPGA programming, power electronics, analogue circuit technology, drive systems and components, automation technology, field bus technology (CAN, Profibus, Interbus-S, Mod-Bus, Lon-Bus, ASI-Bus), computer programming, etc
Contec Steuerungstechnik & Automation GmbH
Wildbichler Straße 2E 6341 Ebbs Austria
Sunday, November 13, 2011
Electronic Product Design and Engineering Services. Embedded hardware and software development.
Example Project - "Designed the RASID interface (electronic hardware, embedded real-time software and packaging), a PC peripheral used for industrial automation. This peripheral's design is based on a 16-bit DSP (TMS320LF2407) with 16 analog inputs 2 analog outputs, 41 digital I/O, serial I/O (RS-422) and a USB interface to the PC."
XMK is a preemptive multitasking kernel for microcontrollers. Its goal is to provide a RTOS small enough (RAM+ROM) to run on 8bit microcontrollers. XMK provides additional/optional features when scaling up to 16bit and 32bit platforms.
Arcobel Embedded System Solutions
The solutions are used in various market segments, some are Energy, Industrial automation, Logistics, Space/Avionics and Vision control.
AAEON: AEC-6940 A High-End Embedded Controller AEC-6940
The AEC-6940, is an advanced embedded controller, which adopts the Intel® CoreTM 2 Duo processor. The AEC-6940 is a high performance, high-end Embedded Controller that features high speed processing and is known as the BOXER 2+ in the AAEON Boxer Series.
- Fanless Design
- Intel Core 2 Duo Processor
- PCI-Express [x16] x 1, PCI-Express [x1] x 1
- Wide DC Power Input Range
- Gigabit Ethernet x 2
Address: Cereslaan 10, Heesch, 5384 VT, The Netherlands
Saturday, November 12, 2011
Consulting Service for the semiconductor and microelectronic industry, FEA modeling, mechanical, electrical & materials engineering applications.
Experts in Electrical, Materials and Mechanical Engineering Consulting. Consulting and Support areas include Business Development, Solar & Flat Panel Technologies, Materials Science among many others.
FEA allows for comprehensive modeling of the chamber's integrity during testing conditions. The FEA model serves as a virtual experiment that allows reduction in prototype cost and testing. An accurate model can reduce the costly repercussions of an incorrectly designed system.
(They may cover Mems and Mechatronics too. - delabs)
Glew Engineering Consulting Inc. 240 Pamela Drive, Mountain View, CA 94040 - Map
Thursday, November 10, 2011
Nordic Semiconductor - Wireless Microchip
ANT is a proven, ultra low power, flexible and easy-to-use network protocol for 2.4GHz ISM band communication. ANT provides multivendor interoperability via the ANT+ managed network and the member companies of the open ANT+ Alliance.
Useful for ultra low power wireless sensor network applications including wireless sensors and hubs.
ANT - Single chip ICs/solutions
ANT is perfectly suited for any kind of low data rate sensor network topologies in personal area networks (PANs) and practical wireless sensor networks
"Nordic Semiconductor has released a matchbox-sized, low cost, battery-powered eval kit for its latest nRF51 Series of SoCs that allows engineers to perform real-world environmental testing of ANT+, Bluetooth low energy (including Bluetooth Smart), and proprietary 2.4GHz ultra low power wireless sensors and accessories 'in the field'"
Nordic Semiconductor ASA
Otto Nielsens veg 12 Trondheim, 7052 Norway
Monday, November 07, 2011
Fujitsu MB86K71 RF Module
This new RF module from Fujitsu, the world's smallest to feature all of the RF circuits necessary for Mobile WiMAX devices including RF-IC, antenna switches, a power amplifier, filters, and an oscillator circuit......
The Fujitsu WiMAX SoC, MB87M3400, fully complies with the IEEE 802.16-2004 standard using an OFDM PHY. The SoC can operate in TDD or FDD modes and supports all the available channel bandwidths from 1.75MHz up to 20MHz bandwidths.
A programmable frequency selection generates the sample clock for any desired bandwidth. When applying 64QAM modulation in a 20MHz channel and using all 192 sub-carriers, the chip can sustain up to 100Mbps peak raw data speed. Uplink subchannelization is supported as defined in the standard.
- Module Size: 15mm x 15mm x 1.5mm
- Operating Voltage: 1.2V/2.925V/3.3V (3 voltages)
- RF band: 2.496GHz - 2.69GHz
- Bandwidth: 5MHz, 10MHz
- Wireless Access Method: 512/1024 FFT OFDMA
- Transmission Standard: IEEE 802.16e-2005