CSMicro Systems -Microcontroller Development

Arduino and PIC Development Kits, Interface Boards, Parts and Tools to complete your Embedded System Project. They also offer product design and software development services.

CSMicro Systems -Microcontroller Development

LAB-XUSB Experimenter Board

It contains the circuitry required by the PIC MCU to operate: 5-volt power supply, oscillator, reset circuit, as well as additional application circuits. Switches, potentiometers, LEDs, LCD module, RS232, USB, speaker and a prototyping area for experimentation are integrated.

Examples provided with kit - Calculator, LCD clock, digital thermometer, LCD backpack, data logger, etc.

CSMicro Systems
748 South Meadows Parkway, Ste. A9-214, Reno NV, 89521 USA

ST7LITE09 8-BIT MCU SV Flash Memory

Industry-standard 8-bit core, featuring an enhanced instruction set. FLASH memory with byte-by-byte In-Circuit Programming (ICP) and In-Application Programming (IAP) capability.

ST7LITE09 - 8-BIT MCU with Single Voltage Flash Memory

Some Features

• 1K or 1.5 Kbytes single voltage Flash Program memory
• 128 bytes RAM
• 128 bytes data EEPROM
• 3-level low voltage supervisor
• 10 interrupt vectors plus TRAP and RESET
• SPI synchronous serial interface

A/D Converter

• 8-bit resolution for 0 to VDD
• Fixed gain Op-amp for 11-bit resolution in 0 to 250 mV range
• 5 input channels

A cost effective solution to drive an array of high brightness LEDs, using the LED driver STP16CP05. The Brightness and Color is uniform
due to current regulation. High efficiency DC-DC converter. Wide Input voltage range - 5 V to 35 V.

STEVAL-ILL003V2 HB 32 LED

Without Diagnostic, based on STP16CP05

• 32 LED matrix driven by STP16CP05
• LED current regulation
• Adjustable brightness
• Animated text capability
• Adjustable blinking speed

Modular Industrial Computers - Reliable and Rugged

Industrial computers and industrial displays that are ready to plug and play. Reliable and Rugged, High performance and excellent in usability. These products will run for years in the most demanding requirements.

Modular Industrial Computers - Reliable and Rugged

The product line also include Computer Enclosures, NEMA Rated Computer Enclosures, and other peripherals for demanding factory environments. These products are designed and manufactured specifically for industrial plant floor applications.

National Electrical Manufacturer's Association NEMA standards for plant environments and current IP Codes for plant environments.

Field Serviceable 15" Stainless PowerBox Computer with Core 2 Duo 1.86GHz

Features Include

• 304 stainless steel NEMA 4X enclosure
• Dimensions: 19"W x 15"H x 6"D
• Removable front door for easy maintenance
• "Rain Gutter"- prevents water from entering enclosure when door is opened
• Sealed connector alcove provided in bottom of enclosure
• Intel Core 2 Duo 1.86GHz processor 800MHz FSB
• 160GB IDE hard drive
• 4 USB ports, 2 serial ports
• 10/100/1000 Base-T LAN connection
• 120/240VAC 275W power supply

Kontron - Embedded Computer Technology ECT

Supplies leading OEMs, system integrators and application providers. CompactPCI, AdvancedTCA, Embedded Computers, Motherboards, Industrial PC, Computer-on-Modules. HMIs, Display Interface Systems, Platforms and Networking Solutions. Kontron AG - Eching near Munich, Germany.

Kontron - Embedded Computer Technology ECT

AdvancedTCA node blade: Intel Xeon Six-Core 5600 (32nm) processor; or, Intel Xeon 5500 (45nm) quad core processor Series.

AT8050 - AdvancedTCA Processor Boards

COM Express, a computer-on-module (COM) form factor, is a highly integrated and compact PC that can be used in a design application much like an integrated circuit component. Each COM Express Module COM integrates core CPU and memory functionality, the common I/O of a PC/AT, USB, audio, graphics, and Ethernet. All I/O signals are mapped to two high density, low profile connectors on the bottom side of the module.

Advanced Telecommunications Computing Architecture (ATCA or AdvancedTCA) is the largest specification effort in the history of the PCI Industrial Computer Manufacturers Group (PICMG), with more than 100 companies participating. Known as AdvancedTCA, the official specification designation is PICMG 3.x (see below). AdvancedTCA is targeted to requirements for the next generation of "carrier grade" communications equipment.

PICMG - Open specifications for Modular Computing

PICMG is a consortium of companies who collaboratively develop open specifications for high performance telecommunications and industrial computing applications.

PICMG - Open specifications for Modular Computing

Specs and Standards for Advanced Mezzanine Card, AdvancedTCA, COM Express, CompactPCI, e-PCI-X, MicroTCA and others.

(Study this page first to understand how computers became more maintanable and expandable - delabs)

PCI-ISA - Passive Backplanes

"The PCI-ISA passive backplane standard moves all of the components normally located on the motherboard to a single plug-in card. Looking much like a standard ISA or PCI card, a PCI-ISA CPU card has two edge connectors on it - one for the PCI bus and one for the ISA bus. The "motherboard" is replaced with a simple "passive backplane" that has only connectors soldered to it."

Portwell - SBC Modules and Industrial Backplanes

Designs and manufactures Communication Appliances along with a full range of Industrial Platform Computers, Panel Device Service etc. They include PICMG, PCI and ISA Industrial Systems. Modular Systems like Qseven, PCM, ETX and COM Express.

Portwell - SBC Modules and Industrial Backplanes

• Intel ATOM 330 1.6GHz Dual Core processor
• Intel 945GC and ICH7 chipset
• One 240-pin DIMM supports single channel DDR2 SDRAM up to 2GB
• Dual display: VGA / DVI, 3rd display via PCI expansion slot
• One PCI expansion slot
• Three SATA ports, one Compact Flash socket & one IDE connector

WADE-8057 - Mini-ITX,Embedded System Board

• Fit for 4U up chassis
• Dedicated to ROBO-8920VG2
• Four PCI-X buses support 16 PCI-X expansion slots

PBPE-19AG64 Server Grade Industrial Backplane

Xi3 - ISYS Technologies - Modular Computer

The Desktop Computer redesigned, completely new, universal, energy efficient, cost-effective modular computer design.

Xi3 - ISYS Technologies - Modular Computer

Universal hardware platform, designed for any solution, from ARM- or X86- based, low-power embedded systems, to home and desktop computers, to affordable servers and supercomputers.

From Hyper Embedded - Microcontroller ASIC and EDA

Some Features

• AMD Athlon 64 X2 up to 35 Watts - AMD 780e and SB710
• Integrated 2GB DDR2 667/800 for increased capability in shock
• Supports dual display for 1080p DVI, VGA, HDMI, LVDS and DP
• Supports 6 USB Ports and 2 SATA Ports, Xi3p and PCIe 1x